Current leadtime 5-10 business days

444fab

444fab444fab444fab

444fab

444fab444fab444fab
  • Home
  • 7.3 Systems
  • Shop
  • Terms
  • More
    • Home
    • 7.3 Systems
    • Shop
    • Terms
  • Home
  • 7.3 Systems
  • Shop
  • Terms

94.5-97 OBS Fuel Systems and Electric Fuel Conversions

Cheapskate

Cheapskate

Cheapskate

-twin spin on wix filters, bases, filter bracket and wiring harness from our budget kit

-adapts to factory fuel lines banjo bolt and reuses factory pressure regulator (tightwad mod) and front flexible return lines to create a simple regulated return/bowl delete. This also saves time during the install by avoiding accessing and changing the

-twin spin on wix filters, bases, filter bracket and wiring harness from our budget kit

-adapts to factory fuel lines banjo bolt and reuses factory pressure regulator (tightwad mod) and front flexible return lines to create a simple regulated return/bowl delete. This also saves time during the install by avoiding accessing and changing the fittings in the cylinder heads. 

-15ft parker pushlok

-aftermarket "sd copy" fuel pump standard

-necessary hardware and fittings as well as oem ford banjo seals. 

-fuelab regulator and upgraded pumps optional

Starts at $349

Budget

Cheapskate

Cheapskate


-Stainless Steel Hardline Regulated Return/Bowl Delete/Mechanical Pump Delete

-Fuelab Regulator

-Twin Spin on Filters

-Raw Bracket

-Walbro Fuel Pump Standard

-30 Amp Relay Harness with 7ft Leads

-15 ft Parker Pushlok Hose

-Block Off Plug

-Fittings and Hardware

 Requires assembly of pump/filter unit and wiring connections 

Starts at $699

Premium

Cheapskate

Premium

Our next step up

In addition to the budget, the premium comes with:

-Pre-assembled Filter and Pump Unit 

-Connections Between Pump and Filters Made with Included Hard Stainless Lines

-Marshall Liquid Filled Fuel Pressure Gauge

-Premade Wiring Harness

-Heat Shrink Terminals and Weatherproof Pump Terminal Boots

Starts at $899


99-03 Superduty Fuel Systems

Budget

Premium

Premium


-Stainless Hardline Regulated Return/Bowl Delete 

-Fuelab Regulator

-Twin Spin on Filters

-Raw Bracket

-Setup to Use Stock Electric Fuel Pump or Can Be Ordered With Various Aftermarket Pumps

-15 ft Parker Pushlok Hose

-Fittings and Hardware

Requires assembly of pump/filter unit and wiring connections

Starts at $575

Premium

Premium

Premium

Our next step up

In addition to the budget, the premium comes with:

-Pre-assembled Filter and Pump Unit 

-Connections Between Pump and Filters Made with Included Hard Stainless Lines

-Marshall Liquid Filled Fuel Pressure Gauge and Install Fittings

-Premade Wiring Harness

-Heat Shrink Terminals and Weatherproof Pump Terminal Boots

Starts at $859

Pump Choices

Walbro

Standard pump is the walbro gsl392
Good for up to ~600hp in a single tank setup (ex: 250/200)
Lifespan is 1-3 years on average
High flow for cheap
Running twins or carrying a spare will guarantee you never get stranded.
30 day limited warranty on walbro pumps. 

OEM Bosch SD

OEM Bosch superduty pump. 

Incredibly reliable and was used in 99-03 trucks from the factory.
Roughly 400+hp capacity. Good for injectors from stock to 30% over nozzle.(ex: 160/30)
10 year average lifespan, this pump is recommended for all smaller injector applications not looking for room to grow. 

Aem

Based on the Bosch 044 frame this is the best budget friendly high hp pump. 

Solidly supports 350/200 and up to ~800hp

Long term reliability is unknown however there are many in service for multiple years with minimal failures.
Single tank applications only*

Fuelab Prodigy

Clearly a top of the line pump but with the primo pricetag to match.
1000hp capacity on high speed setting
Must be run with single tank* 

Twin Pumps

Our signature twin pump design.

Parallel flow results in nearly double the output plus the reliability of a backup pump.

Most twin pump systems are recommended to be wired in a staged setup and

depending on the order options chosen we may only prewire one pump. Twin walbros cannot be run continuously together for more than a short period. Twin bosch can be run continuously together if supplied adequate flow from a sump or drawstraw. 

A twin walbro will support any injector available for a 7.3 (ex: 450/400)

A twin bosch has roughly a 650hp capacity (ex: 350/200)

Pump life and tank concerns

Both superduty and obs trucks have tank systems which can cause serious restriction to electric fuel pumps. Aem, fuelab and most twin pump kits cannot be used with any dual tank system or stock fuel pickup. Walbro fuel pumps are extremely sensitive to restrictions, you should not install a walbro pump on a truck with improperly functioning or unknown condition dual tanks or pickup. Due to this walbros carry a very limited 30 day warranty at our full discretion and no warranty on dual tanks or stock tank pickups. Oem bosch pumps are more forgiving to restrictions and will usually not fail quickly under improper conditions. Fully cleaning and repairing the pickup, high flow tank mod options and single tank swaps are highly recommended. 

Fuel Tank Upgrades 94-03

99-03 Sump, Drawstraw, or Hutch Mod Kit

99-03 Sump, Drawstraw, or Hutch Mod Kit

99-03 Sump, Drawstraw, or Hutch Mod Kit

  

A great place to start to address the often neglected in tank filters

Comes with:

-Your choice of billet 444fab sump, poly drawstraw, or stainless hutch mod with new oem foot.

-Spin on prefilter with bracket

-Fittings, hardware, and pushlok hose

Can easily be expanded upon later to a full system.

$179 

Add On: Sump, Drawstraw, or Hutch Mod

99-03 Sump, Drawstraw, or Hutch Mod Kit

99-03 Sump, Drawstraw, or Hutch Mod Kit

Complete your kit with one of these high flowing options.

-Your choice of billet 444fab sump, poly drawstraw, or stainless hutch mod with new pickup foot.

-6ft 1/2 or 5/8 pushlok hose

Only $100 onto any kit

Important info on our kits

Needed materials

All our default budget and premium kits contain everything you need besides a good liquid thread sealer rated for fuel and oil, usual shop supplies like zip ties, wire loom (budget kit), ect and for 94-97 obs trucks you will need to source a junkyard ford efi inertia switch (usually can be found for very cheap or free) This is to shutoff your new electric fuel pump in event of a crash. 

Install

Although our systems take every measure to help a quick and easy install some novice mechanics may find the install to be overly difficult. We recommend having experience with 7.3 engine repair and terminology as well as aftermarket fuel systems. Plan at least 8 hours for install of a premium kit and additional time for budget kit pre-assembly. Our regulated return lines can be installed without removing the turbo but this method takes extra patience and the ability to work in tight spaces.

Instructions will be emailed to the address from your order,  they are also available to download below so you can see what the install entails.

Please use our email for all technical support it is available 7 days a week for installing customers. 

Shipping

We ship using usps and ups. Domestic flat rate shipments are usually done with ups ground and usps priority. For international shipments an extra fee will be due after purchase to cover international shipping charges. Depending on your country additional customs fees may be due on delivery.


Lead Time

Our handmade kits are produced on a "finish to order" basis. Lead time varies usually between 1-10 business days depending on order complexity and current workload. See up to date lead time estimates on the front page. 

Downloads

Instructions

Obs efuel 2021 (docx)

Download

obs pictures 2021 (docx)

Download

superduty instructions 2021 (docx)

Download

superduty pictures 2021 (docx)

Download

Copyright © 2023 444fab - All Rights Reserved.